About Netgear Router

Netgear is among one of the foremost providers for networking hardware to the users. They provide some of the best networking hardware that includes routers, extenders, adapters, security cameras and a lot more. Their routers are very reliable and provide very good coverage along with a very user friendly experience. The Netgear routers contain some of the most advanced features that include the Guest Network, Parental Controls, Network Map, Network Speed Test, Media Prioritization and more. The user can gain access to the advanced features after logging in to the router. The login process is very easy and it only takes a couple of minutes of the user’s time. The user can simple login using www.routerlogin.net web domain. The user will need to enter the default information on the admin page of the Netgear router. The default username is “admin” and the default password is “password” for most of the Netgear routers. The username and password are case sensitive.

What is www.routerlogin.net?

The www.routerlogin.net is the web domain name that is used to login to the router. The user is prompted for the default information regarding the router and after successfully logging in to the router, the user can configure, monitor, control and even repair their network themselves. At first, the users had to login using the default IP addresses of their routers. Many users faced difficulties in finding out the default IP address specific to their router or they just didn’t know what it was. Netgear came up with a solution, they now ship their routers preconfigured to use www.routerlogin.net instead of the default IP addresses. This way, the login process has become hassle free and the users can now easily login to their routers and secure their network.

What is the Netgear Setup Wizard?

The Netgear Setup Wizard is the web interface that deals with the admin login and router configuration process. The user can configure, customize, control, monitor and even repair their network themselves with the help of the Netgear Setup Wizard. After successfully logging in to the router, the user will gain access to the advanced features of the router. Some of the advanced features are as followed:Netgear routers come with some of the most advanced features and cutting edge technology that are sure to provide the user what they need for years to come. Some of the advanced features are

Advanced features of Netgear Router

Advanced QoS (Quality of Service)- This feature allows the router to reach maximum bandwidth and makes sure that there is no latency or any errors with the network. Basically, the QoS feature controls and manages network resources and is applied for network traffic that deals with online gaming, video streaming, VoIP and more to make sure that the user doesn’t face any lag or delay with their network usage.

MU-MIMO (Multi User, Multi Input Multi Output) – This feature allows the router to communicate with each device simultaneously. This decreases the time the devices have to wait for the signal and speeds up the whole network. This technology basically increases the overall efficiency and capacity of the router, which in turn allows the router to handle much more intensive Wi-Fi activities on different devices.

Guest Network – This feature allows the user to create different networks if the use wishes to share their internet with any guests without having to share their main network and its shared contents. This way, the user can share their internet with any guests by creating alternate networks for a limited period of time without having to constantly worry about sharing their main network and the contents shared on it.

Parental Controls –This feature allows the user to restrict certain websites or block any inappropriate content. This makes the network much more secure. The user can even limit the access to the internet on any particular device for a certain period of time.

Media Prioritization –This feature allows the user to provide more bandwidth to a particular device that they wish to use. This way, if the user is playing any online games or streaming high quality videos, they will not suffer any lag or delay with the network.

Here, we will try to help the users understand about their Netgear router and the processes involved with the setup process. We will provide the users with the initial setup and login troubleshooting process along with how to reset the router, to change the username and password and to update the firmware of the Netgear router using the Netgear Setup Wizard.

 

How to setup and login to the Netgear router using the Netgear Setup Wizard

Connect the modem to the WLAN port of the router using an Ethernet cable. Make sure that the connections are made properly.
Connect the device that you are using to setup the router to any of the LAN ports of the router using an Ethernet cable. Make sure that the connections are made properly on either ends.
Now, switch the device, the modem and the router off and then turn them on. Wait for the devices to finish booting up.
Open any internet browser of your choice and type www.routerlogin.net in the address bar. A login page will pop open.
You will be prompted to put in the username and password. The default username is “admin” and the default password is “password”. The username and password are case sensitive. If the default password doesn’t work, then the user might have changed the default password at some point. Try logging in with any other password. If that fails too, then the router needs to be reset in order to restore the router back to its factory default settings.
After you have successfully logged in, the Netgear Setup Wizard will appear.
You can choose to configure your Netgear router as you desire using the on screen instructions regarding any feature of the router.The Netgear router has been setup and logged in. The user can now configure their network, check their network, repair their network, diagnose any errors if they are facing any problems and fix it themselves. After that, the user can start using their network as they please.

How to Reset the Netgear router

The router will be needed to reset so that the user can restore the router back to its factory settings. Take note that if the router has been reset multiple times, it can damage the firmware of the router.
Here are the steps to reset the Netgear router: Locate the Reset button at the back of the router. It will be inside a very small hole. It might be labeled as Reset or Restore Factory Settings. The label might vary for different routers.
Now, using a paper clip or something similar press and hold the reset button for about ten seconds.
Release the reset button after ten seconds. The LED lights at the front of the router will start blinking. Once the power light becomes stable and green/white in color, the router will have been restored back to its factory settings.Take note that there should not be any interference during the reset process as it can damage the router and might even render the router completely useless.Take note that there should not be any interference during the reset process as it can damage the router and might even render the router completely useless.

How to change the username and password using the Netgear Setup Wizard

  1. The default username and password should be changed in order to secure the network. The default username and password can be changed using the Setup Wizard web interface. Here are the steps to change the username and password for Netgear routers.Open any internet browser on a device that is connected to the Netgear router.
    Type www.routerlogin.net in the address bar and press enter.
  2. A login page will display asking you for the default information of the router. The default username is “admin” and the default password is “password” for most of the routers.After successfully logging in to the router, you will be taken to the Setup Wizardweb interface.
    One the left side of the screen, you will see the Wireless option. Click on that.
  3. Now, you will see the Network Name (SSID) option. Here, you can type in the desired username for your network. Make sure that that you do not share any private information in the name of your network as the username is visible to other devices as well.
  4. Below the Network Name, you will see the Password (Network Key) option. Here, you can type in the desired password for your network. Make sure that the new password that you wish to set is hard for other people to guess.
    Click Apply to save the changes made.
  5. Your changes will now be saved and you can login to your router with any device using the new username and password for your network.

How to update the firmware of the Netgear router using the Check button on the Netgear Setup Wizard

The firmware of the router is the operating software that runs the hardware of the device that it is installed on. The firmware needs to be updated to keep the router and its security up to date. Netgear releases the firmware updates regularly so that the users do not face any trouble.
Here are the steps to update the firmware of the Netgear router using the Setup Wizard

  • Launch an internet browser of your choice from a device that is connected to the Netgear router. It is advised that the device is connected via an Ethernet cable for the firmware update process.
  • Type www.routerlogin.net in the address bar and press enter.
    You will be taken to the login page of the router. The login page will then prompt you to type in the default username and password for the router.
  • The default username is “admin” and the default password is “password” for most of the Netgear routers. The username and password are case sensitive.
  • The Setup Wizard will open up. Click ADVANCED. Then click Administration.
    You will see a Firmware Update or Router Update option. The option may vary for different router models. Click it.
  • Click Check. The router will then check whether any firmware updates are available. If a firmware update is available, the Setup Wizard will then ask you whether you wish to download and install it. Click Yes.
  • The router will now begin the firmware update process. The process usually takes a couple of minutes. It is advised that the firmware update process isn’t interrupted anyhow as it may damage the router and render is unusable.
wifi router

Netgear Setup Wizard features explained

The demands of the tasks required from a network are at an all time high nowadays. In order to keep up with the ever increasing demands, many of the network hardware companies are trying to deliver well made networking products to the users and with it, the software or application to make managing a home network easier. The Setup Wizard helps in managing, monitoring and repairing the network by the user itself. So, basically Netgear have given the ability to configure the router to the user. The user can now remotely monitor and configure the router with the help of the Setup Wizard.The Setup Wizard basically provides the control of the entire network at the user’s fingertips. With the Setup Wizard, anyone can modify the network settings, diagnose and repair their home or office network issues, monitor the wireless devices and much more! But in order to reap all the benefits of the Netgear Setup Wizard, make sure that your router is running the latest firmware as some of the functions are not supported by some of the older firmware.The main purpose of the Setup Wizard is to manage and help configure Netgear devices much easier than the conventional processes. One of the best features that the Setup Wizard provides is real time monitoring of the network. Once you open the Setup Wizard, there are six different panels for different configuration options. They are the Internet, Wi-Fi Connection, Router Settings, Network Map, Parental Controls and ReadyShare.
  • Internet Panel- The internet panel provides the connection status of the network. The internet panel provides insight in to your network. As well as the status of your network, it also provides you with the download and uploads traffic in Mbps.
  • This panel helps for managing storage that is attached to the router. There is also a separate app for ReadyShare but the panel in the Setup Wizard provides an easy way to manage storage devices and printers attached to the router.
  • Wi-Fi Panel-The Wi-Fi panel will show you the connectivity status of your network on all the devices and what devices are running on which channels. Alternatively, you can see if you’re experiencing slow internet connection, and chose to change the channel if needed, providing you a chance to almost never experience slow internet connection. This is where you can connect to the Wi-Fi and manage different networks that you can connect to.
  • Router Settings Panel-In the Router Settings panel, you can manage guest access and a traffic meter which displays the information such as the total upload and download traffic for a specific amount of time. You can also download the firmware through the Router Settings panel.
  • Network Map Panel-The Network Map Panel enlists the number of devices that are connected to the user’s network. It also notifies you when new devices connect to the network.
  • Parental Control Panel-Parental Control panel provides with the security features and real time data monitoring remotely. This makes it really easy to set online boundaries.
  • ReadyShare-This panel helps for managing storage that is attached to the router. There is also a separate app for ReadyShare but the panel in the Setup Wizard provides an easy way to manage storage devices and printers attached to the router.

 

Netgear smart wizard setup

The Netgear routers are needed to be setup by the user to setup and log in using the default information initially. The user can setup and login to their router using the Netgear Smart Setup Wizard web interface. The user can simply go to the www.routerlogin.net web domain to access the Smart Setup Wizard and enter default information whenever prompted. The Smart Wizard allows the user to gain access to the advanced features of the Netgear router. With the help of the advanced features, the user can better configure their network themselves.
Here in this blog, we will try to help the users understand their router better by providing the troubleshooting steps regarding their setup and login process. We provide the step by step process to setup and login to the Netgear routers using the Smart Setup Wizard. Here are the steps to setup and login using the Smart Setup Wizard

setup netgear

Connect the modem to the WAN port of the Netgear router using an Ethernet cable. Make sure that the connections are made properly on both ends. Now, connect the computer or laptop to any of the four internet ports of the router using another Ethernet cable.
Open any internet browser of your choice and type www.routerlogin.net in the address bar. Press enter. The admin page for the Netgear router will open. The admin page will prompt the user to enter the default information regarding the router. The default username is “admin” and the default password is “password” for most of the Netgear routers. The username and password are case sensitive.
Once the user has successfully logged in to the router, the Setup Wizard will appear.
Here, the user can configure their network most suitable to their needs using the simple on-screen instructions provided.
Click Apply to save the changes made.The user will have successfully setup and logged in to the Netgear router using the Setup Wizard. The user can further configure their network using the advanced features of the router themselves to secure their network as well.

How to configure Netgear router

The Netgear router can be configured using the web based interface i.e. the Setup Wizard. The user can gain access to the Setup Wizard using the web domain www.routerlogin.net. Once the user has successfully logged in to their network using www.routerlogin.net by entering the default information regarding their router, the user will gain access to a huge array of advanced features which can be used to configure, control, customize, monitor and even repair their network. Some of the advanced features are as followed.

  1. Parental Controls – The user can use this feature to restrict certain websites or block any inappropriate content on their network. The user can also limit the access of internet on any particular device that they wish.
  2. Guest Network – This feature allows the user to create alternate networks for a limited period of time for any guests or visitors visiting their place. If any guest wishes to use the user’s internet, the user can create another network (other than their main network) for the guests to use with different username and password for a limited period of time. This way, the user’s main network and its shared contents will be kept secure and out of reach from the visitors’ hands.
  3. Media Prioritization – This feature allows the user to prioritize the bandwidth on any particular device that they wish which requires high internet usage. This way, the user can play high end games online or stream high quality videos on their device without any delay or lag.With the help of these advanced features, the user can configure their network to better secure their network as they please.

Connect the modem to the WAN port of the Netgear router using an Ethernet cable. Make sure that the connections are made properly on both ends. Now, connect the computer or laptop to any of the four internet ports of the router using another Ethernet cable.
Open any internet browser of your choice and type www.routerlogin.net in the address bar. Press enter. The admin page for the Netgear router will open. The admin page will prompt the user to enter the default information regarding the router. The default username is “admin” and the default password is “password” for most of the Netgear routers. The username and password are case sensitive.
Once the user has successfully logged in to the router, the Setup Wizard will appear.
Here, the user can configure their network most suitable to their needs using the simple on-screen instructions provided.
Click Apply to save the changes made.The user will have successfully setup and logged in to the Netgear router using the Setup Wizard. The user can further configure their network using the advanced features of the router themselves to secure their network as well.